The position of Tabriz lathe in the Iranian industry
Before we go to Tarash Tabriz model 1392, we should know why Tabriz Machining brand (MST) is so popular in Iran and the Middle East. Tabriz Machine Building has a long history and using the technology of former Czechoslovakia, it has produced machines that are famous for their hard work, precision and durability. Unlike many Chinese devices that have a weak body, Tabriz lathes have excellent casting and hard plated rails.
When it comes to buying a used device, the manufacturing model becomes very important. The models of the 1990s, especially Tabriz model 1392, were produced in an era when there was still a good balance between the quality of materials and assembly. Many experts believe that the alloy used in these years has a very good quality and if the device is properly maintained, it can work like a new device for many years. Babaei Industrial Machinery collection, understanding this issue, selects the best examples of this model for its customers.
Technical specifications and key features of Tabriz lathe model 1392
In order to know why Tarash Tabriz model 1392 is worth buying, we have to take a look under the skin of this iron giant. These models are usually found in the market in the TN50 and TN71 series with different lengths (1.5 meters, 2 meters and 3 meters).
1. Body and casting
The body of this machine is made of high quality gray cast iron, which absorbs the vibrations caused by heavy turning well. This feature makes the surface of the work piece smooth and polished after turning. In Trash Tabriz model 1392, the stress relief operation on the body is well done and after years, the risk of warping of the rails is almost zero.
2. Power transmission system and gearbox
One of the main strengths of Tabriz model 1392 is its powerful gearbox. The gears are made of hardened alloy steels that are highly resistant to wear. If you intend to buy this machine from Babaei Industrial Machinery, rest assured that the technical experts have checked the health of each gear and the sound of the gearbox. The speed change in these models is smooth and provides a wide range of speeds for turning all kinds of metals.
3. Rails and plating
The most important part in buying a used machine is the health of the rails. Trash Tabriz model 1392 rails are induction hardened. This means that the surface of the rail is very hard, but its core has the necessary toughness. After about 12 years of production, if the machine has regular lubrication service, the rail loss will be very small.
Why is it smart to buy Tabriz model 1392 lathe in the new year?
In the new year, due to inflation and economic conditions, capital management is vital for industrialists. Here are strong reasons that show why investing in Tabriz Model 1392 is a strategic decision.
Significant cost savings
The price of a Tabriz Akband lathe is currently very high. On the other hand, cheap Chinese devices do not have the durability and accuracy of Tabriz devices. Buying Tabriz lathe model 1392 allows you to own a permanent industrial machine, while you have paid only a part of the cost of a new machine. Babaei Industrial Machinery has made this price gap more attractive for buyers with fair pricing.
Lower price drop (maintenance of capital)
Industrial devices are not like cars that are scrapped over time. A Tarash Tabriz model 1392 if it is clean, it has the status of cash. Whenever you want, you can sell this device with minimal loss and sometimes even with a profit (due to inflation). The market for buying and selling this model is very hot and has high liquidity.
Abundance of spare parts and easy repairs
One of the biggest challenges of foreign devices is the lack of parts. But for Tabriz lathe model 1392, spare parts can be found in any industrial tool store in Iran. Skilled mechanics are well familiar with the structure of this machine. This means that the sleep of the device in case of failure is minimized. The support team of Babaei Industrial Machinery is always ready to supply parts and guide buyers.
Golden tips when buying Tabriz model 1392
If you have decided to buy, you should be very careful. The second-hand market is full of devices that have a painted appearance but are worn out inside. To distinguish a Tarash Tabriz model 1392 healthy from a defective device, pay attention to the following points:
Rail drop check (clock test)
Ask the seller to install the indicator clock on the support and move it along the rail. The rail drop near the three systems is usually more. A healthy Tabriz lathe model 1392 should not have a drastic drop that lowers the accuracy of the work. In the Babaei Industrial Machines collection, all machines are tested for hours before sale by expert experts to ensure the geometric health of the machine.
The sound of the gearbox and spindle
Turn on the device and test in all rounds (from the lowest to the highest round). The sound of the gearbox should be uniform. Any howling, rattling or unusual noises indicate bearing failure or broken gears. The spindle Tabriz model 1392 must be free of slack. Spindle laxity causes vibration of the part and poor quality of the cutting surface.
Bird status and support
Open the device till the end and check its laziness. Transverse and longitudinal supports should have a smooth movement and the slack of their bolts and nuts should be within the standard range. Too much stiffness or too much clearance are both signs of problems.
Comparison of Tabriz lathe model 1392 with Chinese competitors
Many customers are hesitant between buying a new Chinese machine and a Tabriz lathe model 1392. Let's compare honestly:
- Shaving power: Due to the high torque and powerful gearbox, the Tabriz lathe has the ability to perform heavy shavings (5 mils and more), while most of the Chinese machines of the same category slow down or shake under heavy pressure.
- Lifespan: The Chinese machine may work well for 5 years, but the Tabriz model 1392 lathe is designed to work for 30 years.
- Second-hand value: After a few years of operation, the Chinese machine has a sharp drop in price, but the Tabriz lathe remains valuable.
The role of Babai industrial machinery in a safe purchase
Buying a used device is risky. You might buy a machine that looks clean, but the gearbox is full of thick oil to hide the noise, or the rails are stone-grinded to hide the scratches. This is where the credibility of the seller comes first.
Babaei Industrial Machinery is known as a reliable reference with years of experience in the field of buying and selling industrial machinery. Why should you trust this collection to buy Tabriz model 1392?
- Strict expertise: All the devices entered into the Babai collection go through strict technical filters. We never offer a machine that has a fundamental defect to the customer.
- Transparency in the transaction: The technical status of the machine, including possible strengths and weaknesses, is announced to the buyer in a completely transparent manner.
- Variety of inventory: In Babaei Industrial Machinery, you can view and compare the types of Tabriz lathe model 1392 in lengths of 1.5 and 2 meters.
- Competitive price: Eliminating middlemen and buying directly has made the prices offered in this collection very suitable and affordable.
maintenance and service; The secret of durability of Tabriz model 1392
After buying a machine from Babaei Industrial Machinery, proper maintenance is the guarantee of its life. Although Tarash Tabriz model 1392 is a tough machine, it needs care:
- Daily lubrication: Rails and lubrication points should be lubricated every day before starting work. The dryness of the rail is the killer of the device's accuracy.
- The level of the device: The device must be installed on a suitable and completely level foundation. Misalignment will cause the rail to become complicated over time.
- Gearbox oil change: Change the gearbox oil according to the schedule to prevent gear wear.
- Cleaning: After finishing work, be sure to clean the dirt from the rail and between the gears. Penetration of fine pottery under the support can create deep lines on the tabriz model 1392 rail.
Industrial applications of Tabriz lathe model 1392
This device is an all-in-one machine. From turning car parts to making parts of agricultural machinery, oil and gas industries and even molding, Tarash Tabriz model 1392 meets the needs. The screw threading capability of this machine is very high and it cuts all kinds of millimeter and inch threads with precision. This flexibility has caused the demand to buy it in Babaei Industrial Machinery to be always high.
Many lathe workshops that are newly established, instead of spending a lot on CNC machines, start their work with one or two Tabriz model 1392 lathes. This will make the investment return much faster and reduce the investment risk.
Summary and closing remarks
Finally, if you are looking for a lathe that is a combination of power, precision, durability and reasonable price, Tabriz model 1392 is one of the best options on the table. This device has passed its test and has come out proud in the harsh industrial conditions of Iran. Buying this model in the new year, considering the market conditions, is considered a smart economic decision.
